Analysis of fuel consumption failure of fuel injection screw compressor发表时间:2019-09-04 15:10 Learn and grow together with Dongfang Will compressor every day! In general, oil running is closely related to the following factors: oil failure, compressor system failure, improper oil installation, oil separation system design defects, etc. If the compressor runs oil, in addition to polluting post-treatment equipment, such as dryers and precision filters, it will also affect product quality, resulting in varying degrees of damage to some production equipment. Therefore, it is necessary for us to master the causes and treatment methods of large fuel consumption of screw compressors In the oil injection screw compressor, a large amount of oil is injected into the volume between the teeth of the compressor while the gas is compressed. The oil and gas mixture formed by these oils and compressed gases is discharged to the oil and gas separator of the unit after undergoing the same compression process. The oil-gas separator is one of the main equipment in the oil-injection screw compressor system. In order to reduce the oil content in the exhaust of the unit and recycle the lubricating oil in the unit, the oil and gas separator must be used to effectively separate the lubricating oil from the gas. If the oil is faulty, the lubricating oil can not be separated well, and the lubricating oil will be discharged with the compressed air. Therefore, the failure of oil and its oil core is the main factor of fuel consumption failure of fuel injection screw compressor. |